AvePro BirdAngle Custom Made

Custom-made angled ledge deterrent profile. Installed on ledges and architectural features, the sloped profile removes the flat landing surface birds need to perch and roost. Available in Colorbond colours. Custom sized to order. 3-5 business days production.

✔ Colorbond colour matching: integrates with the building facade. The specification choice for architects, building managers, and projects where aesthetics matter as much as performance.

✔ Custom sizing: base width and height specified per order to suit the ledge profile.

✔ Angled deterrence mechanism: no rods, no points. The slope itself is the deterrent. Appropriate where spikes are visually unacceptable or where the ledge profile does not suit spike installation.

✔ Fairy Martin deterrence: installed inverted on eaves and covered areas to deter Fairy Martins (protected species) from nesting. Compliant deterrence method.

Size: Custom

Custom

This product is quoted per project. Tell us about your job and we'll get back to you within one business day.

SKU: 13-APSC-00

Pest IT Signature Range

Pest IT's own bird management brand and one of Australia's most extensive ranges of professional bird control systems.

Best For

✔ Architects and building managers specifying colour-matched bird deterrence on commercial buildings.

✔ Ledges and features where spike installation is not suitable due to profile, aesthetics, or specification requirements.

✔ Fairy Martin deterrence on eaves and covered areas.

✔ Projects requiring a custom-dimensioned solution.

Not For

✘ Applications where standard spikes (Deluxe or Poly Base) are an appropriate fit: standard spikes are faster and lower cost.

✘ High-pressure nesting: BirdAngle deters landing but does not match the deterrence level of Shock Track or the exclusion of Netting for established populations.

Does not eliminate birds from the site. Deters landing on the treated surface only. Custom made - lead time of 3-5 business days. Not available as a stock item for same-day supply.

Advanced IPM

Integrated Pest Management Role

Deterrence layer for ledges and architectural features where colour matching and custom dimensioning are part of the specification. A different mechanism from spikes: the angled profile removes the flat landing surface rather than presenting pointed rods.

Professional Installation

Clean surface with AvePro Gotta Go Bird Dropping Remover. Allow to dry.
Apply AvePro Clear Bond Poly or Silicone Bond Adhesive to the base of the BirdAngle section.
Press firmly to the ledge surface. Allow to cure per Bond instructions.
For Fairy Martin applications: install the profile inverted on the eave face so the slope faces away from the building.

Varies by linear metres. Approx 15-20 min per 10m for experienced installers. Trade Install

Maintenance

Annual inspection recommended.
Check adhesion and refix any sections that have lifted.
Colorbond steel is weather and corrosion resistant - no other maintenance required.

Safety

WHS at Height applies for installation on roofs, elevated facades, or above 2m.
Wear PPE appropriate for the work environment and access method.
Fairy Martin deterrence note: Fairy Martins are a protected species under the EPBC Act. Deterrence is legal; destruction of active nests or harm to birds is not.

Brand: AvePro

Pest IT's own bird management brand and one of Australia's most extensive ranges of professional bird control systems.

More Product Info

About AvePro BirdAngle Custom Made

A custom-made angled ledge deterrent that removes the flat landing surface birds need to perch and roost. When there is no flat surface, there is nowhere to land. Installed on ledges and architectural features on commercial buildings where colour matching and custom dimensioning are part of the specification. Available in the full Colorbond colour range so the deterrent integrates with the building facade rather than standing out. For the architect writing bird deterrence into a building specification, or the facilities manager presenting options to a building owner who has rejected visible spikes, BirdAngle is a colour-matched, site-specific solution that meets the aesthetic brief. Custom made to order: specify the base width, height, and Colorbond colour. 3-5 business days from order to dispatch. Contact Pest IT with the dimensions and a team member will confirm the specification and provide a quote. Installed with AvePro Bond adhesive (10-12m coverage per cartridge). For Fairy Martin deterrence on eaves and covered roof areas, BirdAngle can be installed inverted so the slope faces away from the building. Fairy Martins are a protected species: deterrence must be humane, and the inverted BirdAngle configuration is a compliant deterrence method.

Warranty

Pest IT warrants this product against defects in materials and workmanship for a period of 12 months from the date of purchase. This warranty applies under normal use and installation conditions. It does not cover damage resulting from misuse, incorrect installation, modification, or normal wear and tear. Nothing in this warranty limits your rights under the Australian Consumer Law.

Shipping Estimator

AvePro BirdAngle Custom Made

Advanced IPM

More Product Info

Your cart

Order note

Estimate Shipping

Coupon